[Guide] How to Install Factory Image for Nexus 6P

Guide: Install Factory Image for Nexus 6P

Google recently launched its two Nexus devices viz, Nexus 6P and Nexus 5X. In collaboration with the Chinese manufacturer Huawei for the first time, Google has now launched its flagship phone, the Nexus 6P. The Android phone comes with the newest Android 6.0 Marshmallow firmware out of the box. Moreover, the device has received yet another update that will take the firmware to build number MDB08K. So if you have modified your stock firmware or have rooted your device, then there are chances that you may not receive the update over the air.

In order to flash the latest available firmware on your Nexus device and restore your device to stock, flashing factory image is the easiest option available. Here, we have listed the latest factory image available for the Nexus 6P and using this tutorial, you can flash any version of the factory image on your device.

Warning: We at DroidViews won’t be liable for any damage to your device whatsoever. A full backup is highly recommended. Reader’s discretion is advised.

DOWNLOAD SECTION

Download(Mirror)| Nexus 6P Factory Image MDA89D
Download(Mirror)| Nexus 6P Factory Image MDB08K
Download | Factory Images for all Nexus devices

HOW TO INSTALL FACTORY IMAGE FOR NEXUS 6P:

This procedure will unlock the bootloader, flash a modified boot image, install TWRP recovery and then root your device. Unlocked bootloader is required to install a modified boot image and setup a custom recovery. However, through a custom recovery, you can flash custom packages, for instance, the SuperSU file, to root your device. For disabling encryption, read the note at the end.

PREREQUISITES

Unlocked bootloader is required to install a custom recovery like TWRP on your device. We will go through the process in the following tutorial.
Set up ADB and Fastboot on your computer. You can download the full Android SDKfrom here, or get the quick ADB and fastboot installer from here. For Mac or Linux OS,click here.
Install Nexus USB Drivers on your computer.
Open Settings> Developer options and enable USB Debugging on your device.
Go to Developer options and enable Allow oem unlock. This is important.

INSTALLATION INSTRUCTIONS

Download the factory image from above and transfer it to your PC.
Make sure you have setup ADB and fastboot on your PC. Also accept Always allow from this computer when you plug in the device for the first time to enable USB Debugging.
Now power off your device and unplug it from your PC.
Boot into the bootloader or fastboot mode. To do so, press and hold volume down/up and the power button simultaneously for 5-6 seconds. When you see the bootloader screen, connect your device to the PC using a USB cable.(Choose fasboot if option is available) You can also issue the following code while connected to the PC, to boot into the bootloader.

adb reboot bootloader
Now plug in your device to the PC and let the drivers install.
Navigate to the location where you have placed the factory image file on PC and extract it to get files with .img.
While the folder with the extracted factory image is open, run the flash-all.bat file on Windows PC and confirm the flashing process. Wait for the process to complete. If you use Linux or Mac OS, run the flash-all.sh file and follow the instructions.
Once done, reboot the device normally. Once you see the new boot logo, that means the system has successfully been installed.